|
Features
– 1 – 10 V control unit for switching and dimming electronic ballasts or Gira Tronic transformers with 1 – 10 V interface.
– Setting the basic brightness.
– Saving of a switch-on dimming value (also using auxiliary unit).
– Double-surface operation: Briefly pressing the button switches the light on. Pressing and holding the button at the top or bottom rocker half
dims the lighting or makes it brighter.
– Multi-phase connection is possible.
Technical data
Rated voltage: AC 230 V, 50/60 Hz
Connection: N conductor required
Switching contact: Relay contact subject to mains potential
Connected load of switching contact
– Light bulbs (switching only) : 700 W
– Gira Tronic transformer: 700 W
– Electronic ballasts: type dependent
1 – 10 V interface
– Control voltage: 0.5 to 10 V
– Control current: max. 50 mA
Cable length
– Auxiliary unit: max. 100 m
– Load: max. 100 m
Connections
– Mains connection: max. 4 mm²
– 1-10 V interface: 1.5 mm²
Auxiliary units
– Non-illuminated mechanical buttons: unlimited
– Auxiliary insert, 2-wire: unlimited
– Auxiliary insert, 3-wire:
Installation depth: 32 mm
Ambient temperature: +5 °C to +45 °C
Notes
– Electronic ballasts generate very high current spikes. For this reason, use a switch-on current limiter or a separate load contact for with greater loads.
|
