Universal Series Dimming Insert (touch dimmer)

Features
– The series dimmer is a touch dimmer with two universal dimming channels for switching and dimming various light sources including light
bulbs, HV halogen lamps, LV halogen lamps with Gira Tronic transformers, or LV halogen lamps with conventional transformers
– The two channels can control various load types independently from one another.
– The two channels can be operated synchronously using a System 2000 auxiliary unit (2-wire).
– Bulb-saving switch-on.
– Electronic short-circuit protection.
– Automatic excess-temperature protection with restart.
– Saving of a switch-on dimming value (also using auxiliary unit).
– With screw terminals.

Technical data
Rated voltage: AC 230 V, 50/60 Hz
Connected load per channel
– at 25 °C: 50 to 260 W/VA
– at 45 °C: 50 to 220 W/VA
Connected load
– Light bulbs: 50 to 260 W
– HV halogen lamps: 50 to 260 W
– Gira Tronic transformer: 50 to 260 W
– wound transformer with
at least 85 % rated load:
50 to 260 VA
– Ohmic-inductive: 50 to 260 VA
– Ohmic-capacitive: 50 to 260 W
Quantity of auxiliary units
– Capacitive-inductive: Not permissible
Installation depth: 28 mm
Connections: max. 4 mm²
Ambient temperature: +5 °C to +45 °C

Notes
– Do not connect capacitive loads (e.g. Gira Tronic transformers) and inductive loads (e.g. conventional transformers) to one dimming
channel of a universal dimming insert at the same time.
– When an output is loaded with more than 260 W/VA, consider the load distribution and temperature range.